C-COM Satellite iNetVu Guide de dépannage télécharger pdf (Page 53)

iNetVu Troubleshooting Guide

C-COM Satellite Systems Inc.

Page 53 of 88

Centering the AZ/PL Potentiometer

Azimuth Potentiometer

AZ Pot locations: 1200, 1500, 1800 (left) 980, 750 (right)

Gear underside of AZ Potentiometer

To center the AZ Potentiometer:

1. Ensure the antenna is physically in the center position on Azimuth before continuing.

Disconnect the sensor cable and manually move the antenna (visually verifying).

2. Locate and remove the azimuth potentiometer.

3. Rotate the potentiometer gear counter clock wise until it stops.

4. Rotate the potentiometer gear clock wise until it stops. A full rotation from one extreme should

be 10 full turns. (if the gear continues turning indefinitely please contact C-Com Technical

Support).

5. Rotate the potentiometer gear five (5) full rotations to approximately center it.

6. Carefully reinstall the potentiometer.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 87 88

Pas de commentaire

C-COM Satellite iNetVu Guide de dépannage Page 53